Finis 3X 300M Stopwatch

Finish 3X 300M Stopwatch stoppers have an improved three-line display and are waterproof.

The Finis Stopwatch has a large memory range of 300 intervals. The watch is suitable for most sports activities. It measures rounds, lap times, frequency and displays time. In order to find  the times in the memory, you do not have to stop the clock, it makes it easy to see the cumulative times in the laps, even if the stopwatch is running.

Accurate time interval up to 10h per 1/100s

Lithium battery provides a long life of about 5 years.

You can use the Finis stopwatch with the help of 4 buttons.

At the right bottom, you can find the MODE button with you can switch between the 4 modes. The first one shows the date and time. Press the MODE button again to switch the stopwatch to the measuring mode.

In the measuring mode, the stopwatch shows a three-line display. The bottom line runs from 0, the line above it shows LAP TIME, or the time of one round. The row above shows SPLIT TIME, or the total time from start to lap time after a given number of rounds.

In this mode, you can turn the stopwatch on and off by pressing the START / STOP button (top right) and the stopwatch shows the measured time. You can interrupt the time measurement with the same button and resume it.

If the stopwatch is stopped, you can reset it by pressing the RESET button (top left).

The stopwatch can also measure the time of one lap, simply by pressing the LAP / SPLIT button after each lap. The lap time is then displayed in the middle row and the total time is counted in the bottom line. However, to clearly see the time of one turn, you can use the MODE button to switch the stopwatch to the next mode where the lap time always points to the main bottom line.

After finishing the measuring and stopping the stopwatch, you will see the total time. But with the RECALL button, you can also view all the times of each round. In the first row, the sum of the displayed laps is always displayed, in the lower row the time of the individual laps and the number of the laps in the bracket.

The fourth mode can measure the temp frequency. Simply press the START / STOP button after three temps and then press it again. The stopwatch will display the number of temps in a minute.